Loading ...
Loading ...
Loading ...
20
Troubleshooting
(when pressure cooking)
Problems Recommendations
If it becomes
difficult to open
and/or close it:
Remove the gasket,
Rinse the gasket under running water then replace it
in the lid without wiping it - fig 19.
If you are unable
to close the lid:
Check that the lid handle is in a vertical position.
Check that the gasket is positioned correctly (see
section "Cleaning and maintenance").
Check that the lid is positioned as indicated on
- Fig 1.
Rinse the gasket under running water then replace it
in the lid without wiping it - fig 19 and ensure that it
is correctly positioned under the grooves on the lid -
fig 15.
If your pressure
cooker has been
heated under
pressure without
liquid inside:
Have your pressure cooker checked by a TEFAL Appro-
ved Service Centre.
If the pressure
indicator emits a
clicking noise and
steam.
This is normal during the first few minutes : it allows
escape of air before cooking.
If the pressure
indicator has not
risen and nothing
is escaping
through the vent
during cooking:
This is normal during the first few minutes.
If the phenomenon persists, check that:
- The heat source is sufficiently strong; if not, increase
it.
- The quantity of liquid in the pot is sufficient.
- The operating valve (A) is positioned on .
- Your pressure cooker is properly closed.
- There is no deterioration of the gasket or edge of the
pot.
- The gasket is correctly positioned.
Loading ...
Loading ...
Loading ...