Loading ...
Loading ...
Loading ...
Back Back to Top Print
Personal Audio System
SRS-X99
Connection method 3: Connecting to a Wi-Fi network using a Mac connected wirelessly
Note that the speaker should be initialized to the factory default for this connection. All
BLUETOOTH device registration (pairing) information is deleted.
This section describes how to connect a Mac and the speaker wirelessly, then how to
connect to a wireless router, using the Mac.
Do the following before starting.
Disconnect the LAN cable (not supplied) from the speaker.
Place the speaker near the wireless router.
Set the Wi-Fi antenna on the rear to the upright position.
Locate the SSID (the name of a wireless network) and encryption key (WEP or WPA),
which are required to set up a Wi-Fi network. The encryption key restricts access to
devices on a network. It is used to make more secure communication between the
devices connected to wireless routers and access points.
1. Have the Wi-Fi network name (SSID) and password of the wireless router available
for reference.
For the SSID and password, refer to the operating instructions of the wireless router.
2. With the speaker turned on, tap and hold the VOL (volume) – button and the
(on/standby) button at the same time for more than 5 seconds.
Help Guide
How to Use
313
Loading ...
Loading ...
Loading ...