Loading ...
Loading ...
Loading ...
Steps
1. Click Maintenance and Management → Device Management
→ Device to enter the device list.
2.
Click
to enter the remote conguraon page.
3. Click System → User → Keyfob User .
4. Click Add to add the user.
5. Check Enable in the pop-up window and set the keyfob's serial
No.
6. Oponal: Enable the Remain Open Status of the turnsle.
Note
If enabling this funcon, aer the keyfob is matching
completed, you can set the barrier as remaining open by using
the keyfob.
7. Set the door open direcon
8. Click OK.
Note
Up to 32 keyfob users can be added.
8.11.7 Set Security
Steps
1. Click Maintenance and Management → Device Management
→ Device to enter the device list.
2.
Click
to enter the remote conguraon page.
3. Click System → Security .
4. Select the density level in the drop-down list.
5. You can select Compable Mode or Security Mode.
Compable Mode
The user informaon vericaon is compable with the old
client soware version when logging in.
Security Mode
High security level during the user informaon vericaon
when logging in.
6. Click Save.
8.11.8 Congure Lane Parameters
You can set the passing parameters for a person to pass through
the turnsle.
Steps
1. Click Maintenance and Management → Device to enter the
device list.
2.
Click
to enter the remote conguraon page.
3. Click System → Lane Sengs .
4. Set the lane parameters.
Delayed Time Duraon When Closing Barrier
Set the delayed me duraon when barrier is closing. The
barrier will be closed aer the congured delayed me.
Max. Intrusion Duraon
84
Loading ...
Loading ...
Loading ...