Hikvision DS-K3B501SX User Manual

Loading ...

Note

Currently, the supported card enrollment staon models

include DS-K1F100-D8, DS-K1F100-M, DS-K1F100-D8E, and

DS-K1F180-D8E.

Card Type

This eld is only available when the model is DS-K1F100-D8E

or DS-K1F180-D8E. Select the card type as EM card or M1

card according to the actual card type.

Buzzing

Enable or disable the buzzing when the card number is read

successfully.

Card No. Type

Select the type of the card number according to actual

needs.

M1 Card Encrypon

This eld is only available when the model is DS-K1F100-D8,

DS-K1F100-D8E, or DS-K1F180-D8E. If the card is M1 card,

then you can enable the M1 Card Encrypon funcon and

select the sector of the card to encrypt.

7. Click OK to conrm the operaon.

8. Place the card on the card enrollment staon, and click Read to

get the card number.

The card number will display in the Card No. eld

automacally.

9. Click Add.

The card will be issued to the person.

8.4.4 Upload a Face Photo from Local PC

When adding person, you can upload a face photo stored in local

PC to the client as the person's prole.

Steps

1. Enter Person module.

2. Select an organizaon in the organizaon list to add the person

and click Add.

Note

Enter the person's basic informaon rst. For details about

conguring person's basic informaon, refer to Congure Basic

Informaon.

3. Click Add Face in the Basic Informaon panel.

4. Select Upload.

5. Select a picture from the PC running the client.

Note

The picture should be in JPG or JPEG format and smaller than

200 KB.

6. Oponal: Enable Verify by Device to check whether the facial

recognion device managed in the client can recognize the face

in the photo.

7. Conrm to add the person.

Loading ...

Hikvision DS-K3B501SX Pro Swing Barriers

User Manual - Page 59