Loading ...
Loading ...
Loading ...
Note
Once the ngerprint is added, the ngerprint type cannot be
changed.
8.4.8 Collect Fingerprint via Access Control Device
When adding person, you can collect ngerprint informaon via
the access control device's ngerprint module. The ngerprints
recorded can be used as credenals of the persons to access the
authorized doors.
Before You Start
Make sure ngerprint collecon is supported by the access
control device.
Steps
1. Enter Person module.
2. Select an organizaon in the organizaon list to add the person
and click Add.
Note
Enter the person's basic informaon rst. For details about
conguring person's basic informaon, refer to Congure Basic
Informaon.
3. In the Credenal → Fingerprint panel, click +.
4. In the pop-up window, select the collecon mode as Remote.
5. Select an access control device which supports ngerprint
recognion funcon from the drop-down list.
6. Collect the ngerprint.
1) Click Start.
2) Place and li your ngerprint on the ngerprint scanner of
the selected access control device to collect the ngerprint.
3) Click Add to save the recorded ngerprint.
7. Conrm to add the person.
-
Click Add to add the person and close the Add Person
window.
-
Click Add and New to add the person and connue to add
other persons .
Note
Once the ngerprint is added, the ngerprint type cannot be
changed.
8.4.9 Congure Access Control Informaon
When adding a person, you can set her/his access control
informaon, such as binding an access control group with the
person, conguring PIN code, seng the person as a visitor, a
blocklist person, or a super user, etc.
Steps
1. Enter Person module.
2. Select an organizaon in the organizaon list to add the person
and click Add.
3.
In the Access Control area, click
to select access group(s) for
the person.
47
Loading ...
Loading ...
Loading ...