Loading ...
Loading ...
Loading ...
Note
You can check Oine Authencaon to enable the super
password authencaon when the access control device
is disconnected with the client.
Local Authencaon and Super Password
Authencaon by the access control device and by the
super password.
4) Select the added person/card group in the le list below and
it will be added to the Selected list on the right as the
authencaon group.
5) Click the added authencaon group in the right list to set
authencaon mes in the Auth Times column.
Note
●
The authencaon mes should be larger than 0 and
smaller than the added personnel quanty in the
personnel group.
●
The maximum value of authencaon mes is 16.
6) Click Save.
Note
●
For each access control point (door), up to four
authencaon groups can be added.
●
For the authencaon group of which authencaon type is
Local Authencaon, up to 8 person/card groups can be
added to the authencaon group.
●
For the authencaon group of which authencaon type is
Local Authencaon and Super Password or Local
Authencaon and Remotely Open Door, up to 7 person/
card groups can be added to the authencaon group.
7. Click Save.
8.7.4 Congure Custom Wiegand Rule
Based on the knowledge of uploading rule for the third party
Wiegand, you can set mulple customized Wiegand rules to
communicate between the device and the third party card
readers.
Before You Start
Wire the third party card readers to the device.
Steps
Note
●
By default, the device disables the custom wiegand funcon. If
the device enables the custom Wiegand funcon, all wiegand
interfaces in the device will use the customized wiegand
protocol.
●
Up to 5 custom Wiegands can be set.
●
For details about the custom Wiegand, see Custom Wiegand
Rule Descripons.
1. Click Access Control → Advanced Funcon → Custom
Wiegand to enter the Custom Wiegand page.
2. Select a custom Wiegand on the le.
67
Loading ...
Loading ...
Loading ...