Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/54577619-ds-k3b501sx/bg53.png)
3. Create a Wiegand name.
Note
Up to 32 characters are allowed in the custom Wiegand name.
4. Click Select Device to select the access control device for
seng the custom wiegand.
5. Set the parity mode according to the property of the third
party card reader.
Note
●
Up to 80 bits are allowed in the total length.
●
The odd parity start bit, the odd parity length, the even
parity start bit and the even parity length range from 1 to 80
bit.
●
The start bit of the card ID, the manufacturer code, the site
code, and the OEM should range from 1 to 80 bit.
6. Set output transformaon rule.
1) Click Set Rule to open the Set Output Transformaon Rules
window.
Figure 8-7 Set Output Transformaon Rule
2) Select rules on the le list.
The selected rules will be added to the right list.
3) Oponal: Drag the rules to change the rule order.
4) Click OK.
5) In the Custom Wiegand tab, set the rule's start bit, length,
and the decimal digit.
7. Click Save.
8.7.5 Congure Card Reader Authencaon Mode
and Schedule
You can set the passing rules for the card reader of the access
control device according to your actual needs.
Steps
1. Click Access Control → Advanced Funcon → Authencaon
to enter the authencaon mode conguraon page.
2. Select a card reader on the le to congure.
3. Set card reader authencaon mode.
1) Click Conguraon.
68
Loading ...
Loading ...
Loading ...