1. Home
  2. Hikvision
  3. Hikvision DS-K3B501SX User Manual
  4. Page 77

Hikvision DS-K3B501SX Pro Swing Barriers

User Manual - Page 77

For DS-K3B501SX.

PDF File Manual, 115 pages, Read Online | Download pdf file

DS-K3B501SX photo
Loading ...
Loading ...
Loading ...
Card Reader Type/Card Reader Descripon
Get card reader type and descripon. They are read-only.
4. Oponal: Some of the following parameters are not listed in
the Basic Informaon page, click Advanced to edit the
parameters.
Enable Card Reader
If enabling the funcon, user can present card on the card
reader. If disabling the funcon, the card reader for entrance
cannot be used.
OK LED Polarity/Error LED Polarity/Buzzer Polarity
Set OK LED Polarity/Error LED Polarity/Buzzer LED Polarity of
main board according to the card reader parameters.
Generally, adopts the default sengs.
Buzzing Time
Set the card reader buzzing me. The available me ranges
from 0 to 5,999s. 0 represents connuous buzzing.
Max. Interval When Entering PWD
When you inpung the password on the card reader, if the
interval between pressing two digits is larger than the set
value, the digits you pressed before will be cleared
automacally.
Tampering Detecon
Enable the an-tamper detecon for the card reader.
Communicate with Controller Every
When the access control device cannot connect with the
card reader for longer than the set me, the card reader will
turn oine automacally.
Fingerprint Recognion Level
Select the ngerprint recognion level in the drop-down list.
5. Click OK.
6. Oponal: Click Copy to, and then select the card reader(s) to
copy the parameters in the page to the selected card reader(s).
Congure Parameters for Alarm Output
Aer adding the access control device, if the device links to alarm
outputs, you can congure the parameters.
Before You Start
Add access control device to the client, and make sure the device
supports alarm output.
Steps
1. Click Access Control → Advanced Funcon → Device
Parameter to enter access control parameter conguraon
page.
2.
In the device list on the le, click
to expand the door, select
an alarm input and you can edit the alarm input's parameters
on the right.
3. Set the alarm output parameters.
Name
Edit the card reader name as desired.
Alarm Output Acve Time
How long the alarm output will last aer triggered.
62
Loading ...
Loading ...
Loading ...