Hikvision DS-K3B501SX Pro Swing Barriers

User Manual - Page 52

For DS-K3B501SX.

PDF File Manual, 115 pages, Read Online | Download pdf file

DS-K3B501SX photo
Loading ...
Loading ...
Loading ...
3. Click Add to open the Add window, and then select IP/Domain
as the adding mode.
4. Enter the required informaon.
Name
Create a descripve name for the device. For example, you
can use a nickname that can show the locaon or feature of
the device.
Address
The IP address or domain name of the device.
Port
The devices to add share the same port number. The default
value is 8000.
User Name
Enter the device user name. By default, the user name is
admin.
Password
Enter the device password.
Cauon
The password strength of the device can be automacally
checked. We highly recommend you change the password of
your own choosing (using a minimum of 8 characters,
including at least three kinds of following categories: upper
case leers, lower case leers, numbers, and special
characters) in order to increase the security of your product.
And we recommend you change your password regularly,
especially in the high security system, changing the
password monthly or weekly can beer protect your
product.
Proper conguraon of all passwords and other security
sengs is the responsibility of the installer and/or end-user.
5. Oponal: Check Transmission Encrypon (TLS) to enable
transmission encrypon using TLS (Transport Layer Security)
protocol for security purpose.
Note
This funcon should be supported by the device.
If you have enabled Cercate Vericaon, you should click
Open Cercate Directory to open the default folder, and
copy the cercate le exported from the device to this
default directory to strengthen the security. See for details
about enabling cercate vericaon.
You can log into the device to get the cercate le by web
browser.
6. Check Synchronize Time to synchronize the device me with
the PC running the client aer adding the device to the client.
7. Oponal: Check Import to Group to create a group by the
device name, and import all the channels of the device to this
group.
Example
For access control device, its access points, alarm inputs/
outputs, and encoding channels (if exist) will be imported to
this group.
37
Loading ...
Loading ...
Loading ...