Loading ...
Loading ...
Loading ...
3. Add a person/card group for the access control device.
1) Click Add on the right panel.
2) Create a name for the group as desired.
3) Specify the start me and end me of the eecve period
for the person/card group.
4) Select members(s) and card(s) in the Available list, and the
selected member(s) and card(s) will be added to the
Selected list.
Note
Make sure you have issue card to the person.
Make sure you have set access group and apply the access
group to the access control device successfully.
5) Click Save.
6) Oponal: Select the person/card group(s), and then click
Delete to delete it(them).
7) Oponal: Select the person/card group(s), and then click
Apply to re-apply access group that failed to be applied
previously to the access control device.
4. Select an access control point (door) of selected device on the
le panel.
5. Enter the maximum interval when entering password.
6. Add an authencaon group for the selected access control
point.
1) Click Add on the Authencaon Groups panel.
2) Select a congured template as the authencaon template
from the drop-down list.
Note
For seng the template, refer to Congure Schedule and
Template.
3) Select the authencaon type as Local Authencaon, Local
Authencaon and Remotely Open Door, or Local
Authencaon and Super Password from the drop-down
list.
Local Authencaon
Authencaon by the access control device.
Local Authencaon and Remotely Open Door
Authencaon by the access control device and by the
client. When the person swipes the card on the device, a
window will pop up. You can unlock the door via the
client.
Figure 8-6 Remotely Open Door
66
Loading ...
Loading ...
Loading ...