Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/54577619-ds-k3b501sx/bg68.png)
5. Click OK.
8.11.15 Congure IR Detectors
You can set an-pinch for barrier closing, inducve mode and IR
mode.
Steps
1. Click Maintenance and Management → Device to enter the
device list.
2.
Click
to enter the remote conguraon page.
3. Click Other → Turnsle Module Management .
4. Check to enable Custom An-Pinch for Barrier Closing. When
the device detects that there are people staying in the lane, the
barrier will not close. Aer enabled, you can uncheck some IR
beam No., allowing the barrier to close early. However, when
the barrier is opened or closed, it may cause injury to
pedestrians.
5. Select Inducve Mode (Entrance), Inducve Mode (Exit).
6. Select IR Mode. When you select Panic Mode, you can uncheck
the damaged IR beam No. and temporarily restore the lane to
normal use. However, when the barrier is opened or closed, it
may cause injury to pedestrians.
7. Click Save.
8.11.16 View Relay Status
Click Maintenance and Management → Device Management →
Device to enter the device list.
Click
to enter the remote conguraon page.
Click Status → Relay and you can view the relay status.
89
Loading ...
Loading ...
Loading ...