Hikvision DS-K3B501SX User Manual

Loading ...

The jumper cap's posion of barrier closing for exit (NC) is as

below:

6.5.2 Alarm Relay Output Mode (NO/NC)

Alarm Relay Output Mode (NO):

Alarm Relay Output Mode (NC):

7 Acvaon

You should acvate the device before the rst login. Aer

powering on the device, the system will switch to Device

Acvaon page.

Acvaon via the device, SADP tool and the client soware are

supported.

The default values of the device are as follows:

●

The default IP address: 192.0.0.64

●

The default port No.: 8000

●

The default user name: admin

7.1 Acvate via SADP

SADP is a tool to detect, acvate and modify the IP address of the

device over the LAN.

Before You Start

●

Get the SADP soware from the supplied disk or the ocial

website

hp://www.hikvision.com/en/ , and install the SADP

according to the prompts.

●

The device and the PC that runs the SADP tool should be within

the same subnet.

The following steps show how to acvate a device and modify its

IP address. For batch acvaon and IP addresses modicaon,

refer to User Manual of SADP for details.

Steps

1. Run the SADP soware and search the online devices.

2. Find and select your device in online device list.

Loading ...

Hikvision DS-K3B501SX Pro Swing Barriers