Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/54577619-ds-k3b501sx/bg4f.png)
Note
The lane width will aect the device working. Set a correct
lane width or the barrier may not open.
Do Not Open Barrier When Lane is Not Clear
If there is someone or something in the lane, the gate will
not open even if the credenal is authencated.
This funcon is designed to avoid more than one person
passing through the gate with only one authencaon.
Control Mode
Select the controller which will control the barrier status of
the device.
●
If you select So Mode, the barrier will be closed only aer
the person walks out of the lane.
●
If you select Guard Mode, only mechanical an-pinch is
enabled, IR an-pinch is disabled.
5. Click OK.
8.7.2 Congure Remaining Open/Closed
You can set the status of the door as open or closed. For example,
you can set the door remaining closed in the holiday, and set the
door remaining open in the specied period of the work day.
Before You Start
Add the access control devices to the system.
Steps
1. Click Access Control → Advanced Funcon → Remain Open/
Closed to enter the Remain Open/Closed page.
2. Select the door that need to be congured on the le panel.
3. To set the door status during the work day, click the Week
Schedule and perform the following operaons.
1) Click Remain Open or Remain Closed.
2) Drag the cursor to draw the me duraon, which means in
that duraon of me, the congured access group is
acvated.
Note
Up to 8 me duraons can be set to each day in the week
schedule.
3) Oponal: Perform the following operaons to edit the me
duraons.
●
Move the cursor to the me duraon and drag the me
duraon on the meline bar to the desired posion when
the cursor turns to
.
●
Click the me duraon and directly edit the start/end me in
the appeared dialog.
●
Move the cursor to the start or the end of me duraon and
drag to lengthen or shorten the me duraon when the
cursor turns to
.
4) Click Save.
Related Operaons
64
Loading ...
Loading ...
Loading ...