1. Home
  2. Hikvision
  3. Hikvision DS-K3B501SX User Manual
  4. Page 69

Hikvision DS-K3B501SX Pro Swing Barriers

User Manual - Page 69

For DS-K3B501SX.

PDF File Manual, 115 pages, Read Online | Download pdf file

DS-K3B501SX photo
Loading ...
Loading ...
Loading ...
3.
In the Credenal → Card panel, click
on the added card to
set this card as lost card.
Aer reporng card loss, the access authorizaon of this card
will be invalid and inacve. Other person who gets this card
cannot access the doors by swiping this lost card.
4.
Oponal: If the lost card is found, you can click
to cancel the
loss.
Aer cancelling card loss, the access authorizaon of the
person will be valid and acve.
5. If the lost card is added in one access group and the access
group is applied to the device already, aer reporng card loss
or cancelling card loss, a window will pop up to nofy you to
apply the changes to the device. Aer applying to device, these
changes can take eect on the device.
8.4.22 Set Card Issuing Parameters
The client provides two modes for reading a card's number: via
card enrollment staon or via the card reader of the access
control device. If a card enrollment staon is available, connect it
to the PC running the client by USB interface or COM, and place
the card on the card enrollment to read the card number. If not,
you can also swipe the card on the card reader of the added
access control device to get the card number. As a result, before
issuing a card to one person, you need to set the card issuing
parameters including the issuing mode and related parameters.
When adding a card to one person, click Sengs to open the
Card Issuing Sengs window.
Local Mode: Issue Card by Card Enrollment
Staon
Connect a card enrollment staon to the PC running the client.
You can place the card on the card enrollment staon to get the
card number.
Card Enrollment Staon
Select the model of the connected card enrollment staon
Note
Currently, the supported card enrollment staon models
include DS-K1F100-D8, DS-K1F100-M, DS-K1F100-D8E, and DS-
K1F180-D8E.
Card Type
This eld is only available when the model is DS-K1F100-D8E or
DS-K1F180-D8E.
Select the card type as EM card or IC card according to the
actual card type.
Serial Port
It is only available when the model is DS-K1F100-M.
Select the COM the card enrollment staon connects to.
Buzzing
Enable or disable the buzzing when the card number is read
successfully.
Card No. Type
54
Loading ...
Loading ...
Loading ...