Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/54577619-ds-k3b501sx/bg4b.png)
If enable the funcon, the device can recognize the NFC
card. You can present NFC card on the device.
Enable M1 Card
If enable the funcon, the device can recognize the M1 card.
You can present M1 card on the device.
Enable EM Card
If enable the funcon, the device can recognize the EM card.
You can present EM card on the device.
Enable CPU Card
Reserved. If enable the funcon, the device can recognize
the CPU card. You can present CPU card on the device.
Enable ID Card
Reserved. If enable the funcon, the device can recognize
the ID card. You can present ID card on the device.
4. Click OK.
5. Oponal: Click Copy to, and then select the access control
device(s) to copy the parameters in the page to the selected
device(s).
Congure Parameters for Door
Aer adding the access control device, you can congure its
access point door parameters.
Steps
1. Click Access Control → Advanced Funcon → Device
Parameter .
2. Select an access control device on the le panel, and then click
to show the doors or oors of the selected device.
3. Select a door or oor to show its parameters on the right page.
4. Edit the door or oor parameters.
Note
s
The displayed parameters may vary for dierent access control
devices.
Name
Edit the card reader name as desired.
Exit Buon Type
You can set the exit buon as remaining closed or remaining
open. Usually, it is remaining open.
Open Duraon
Aer swiping the normal card and relay acon, the me for
locking the door starts working.
Door Le Open Timeout Alarm
The alarm can be triggered if the door has not been closed in
a congured me period. If it is set as 0, no alarm will be
triggered.
Super Password
The specic person can open the door by inpung the super
password.
60
Loading ...
Loading ...
Loading ...