Loading ...
Loading ...
Loading ...
Steps
1. Click Maintenance and Management → Device Management
→ Device to enter the device list.
2.
Click
to enter the remote conguraon page.
3. Click Other → Audio File .
Note
By default, the system contains the audio content. For details
about the index related audio content, see Table of Audio
Index Related Content.
4. Select the index (the playing content) corresponded play scene.
5. Oponal: Input the descripons of the play scene.
6. Click Save Parameters to save the relaonship between the
index (the playing content) and the play scene.
7. Oponal: Click Export to export the default audio le to the
local computer.
8. Oponal: Click ... and select audio le from the local computer.
Click Import to import the le to the device.
Note
●
The imported audio le should be in MEM format.
●
For details about converng other format of the audio le to
MEM format, see the audio conversion manual.
●
If you use the third part soware to create or edit an audio
le, the volume of the audio le should be no less than 0 ×
68. If the volume is less than the value, it will exceed the
loudspeaker's power consumpon, so that damage the
loudspeaker.
8.11.13 Congure Passing Record
You can record and upload passing events.
Click Maintenance and Management → Device Management →
Device to enter the device list.
Click
to enter the remote conguraon page.
Click Other → Turnsle Management .
Check Enable Passing Record. Aer enabled, the device will
record and upload passing events.
Click Save.
8.11.14 Congure Parameters for Lane Controller
Aer adding the lane controller to the client, you can congure its
parameters for passing through the lane.
Steps
1. Click Maintenance and Management → Device Management
→ Device to enter the device list.
2.
Click
to enter the remote conguraon page.
3. Click Other → Lane Controller Management .
4. Edit the parameters.
Passing Mode
Select the controller which will control the barrier status of
the device.
87
Loading ...
Loading ...
Loading ...