Loading ...
Loading ...
Loading ...
Note
For details about the DIP switch value and meaning, see DIP
Switch Descripon.
The barrier will open automacally and turns back to the
closed posion. At this circumstance, the device enters the
normal mode.
6.2 Pair Keyfob (Oponal)
Pair the remote control to the device through DIP switch to open/
close the barrier remotely.
Before You Start
Ask our technique supports or sales and purchase the keyfob.
Steps
Note
Up to 32 keyfobs can be added to the turnsle.
1. Power o the turnsle.
2. Set the No.4 switch of the DIP Switch on the access control
board to the ON side.
3. Power on the turnsle and it will enter the keyfob pairing
mode.
4. Hold the Close buon for more than 10 seconds. Or pair
turnsle and keyfob in the client soware, see Manage Keyfob
User for more details.
The keyfob's indicator of the will ash twice if the pairing is
completed.
5. Set the No.4 switch to OFF, and reboot the turnsle to take
eect.
Note
●
Only one turnsle can pair the keyfob. If mulple turnsles
are in the pairing mode, the keyfob will select only one of
them to pair.
●
For details about DIP switch value and meaning, see DIP
Switch.
6. Oponal: Go to System → User → Keyfob User on the remote
control page of the client soware to delete the keyfob.
6.3 Inialize Device
Steps
1. Remove the jumper cap of inializaon pin on the access
control board.
29
Loading ...
Loading ...
Loading ...