Loading ...
Loading ...
Loading ...
Setting Record Linkage
On the Alarm page, click
to enable record linkage, select the channel as needed, and set
Post-Record to set alarm linkage and record delay.
After Post-Record is congured, alarm recording continues for an extended period after the alarm
ends.
Figure 6-55 Record linkage
6.5.1.2.3 Snapshot Linkage
After snapshot linkage is congured, the system can automatically alarm and take snapshots when
an alarm is triggered.
Prerequisites
After the corresponding alarm type (Normal , Motion, or Alarm) is enabled, the snapshot channel
links capturing picture. For details, see "10.3 Setting Record Plan".
Procedure
On the Alarm page, click
to enable snapshot linkage, and select the channel as needed.
Figure 6-56 Snapshot linkage
6.5.1.2.4 Alarm-out Linkage
When an alarm is triggered, the system can automatically link with alarm-out device.
On the Alarm page, click
to enable alarm-out linkage, select the channel as needed, and then
congure Post alarm.
When alarm delay is congured, alarm continues for an extended period after the alarm ends.
Operation Manual
66
Loading ...
Loading ...
Loading ...