Dahua IPC-HFW2449S-S-IL Dahua Network Camera Web 5.0 Operation Manual V1.0.7

Loading ...

Procedure

Step 1 Select > Network > Platform Access > P2P.

Figure 6-47 P2P

●

When P2P is enabled, remote management on device is supported.

●

When P2P is enabled and the device accesses to the network, the status shows online.

The information of the IP address, MAC address, device name, and device SN will be

collected. The collected information is for remote access only. You can cancel Enable

selection to reject the collection.

Step 2 Log in to mobile phone client and tap Device management.

Step 3 Tap + at the upper-right corner.

Step 4 Scan the QR code on the P2P page.

Step 5 Follow the instructions to nish the settings.

6.3.12.2 ONVIF

The ONVIF verication is enabled by default, which allows the network video products (including

video recording device and other recording devices) from other manufacturers to connect to your

device.

ONVIF is enabled by default.

Procedure

Step 1 Select > Network > Platform Access > ONVIF.

Figure 6-48 ONVIF

Step 2 Click next to ONVIF Verication.

Operation Manual

Loading ...

Dahua IPC-HFW2449S-S-IL 4MP Smart Dual Light Fixed-focal Bullet WizSense Network Camera