Loading ...
Loading ...
Loading ...
APPENDIX 17-21
Cable, Wire, and Hose Routing
1. Water Temperature Sensor Lead Connector
2. Air Cleaner Drain Hose
3. Starter Motor Cable
4. Breather Hose
5. Speed Sensor Lead
6. Run the speed sensor lead and sidestand switch lead to the outside of the starter motor cable
and to the front side of the fuel tank breather hose (other than CAL, SEA-B1 and TH models).
7. Sidestand Switch Lead
8. Fuel Tank Drain Hose
9. Fuel Tank Breather Hose (Other than CAL, SEA-B1 and TH Models)
10. Run the speed sensor lead and sidestand switch lead to the inside of the fuel tank breather hose
(other than CAL, SEA-B1 and TH models) and fuel tank drain hose.
11. Run the fuel tank breather hose (other than CAL, SEA-B1 and TH models) and fuel tank drain
hose to the inside of the chain cover.
12. Hold the sidestand switch lead and taping portion of the neutral switch/oil pressure switch lead
with the clamp. Touch the clamp to the boss of the water pump cover.
13. Oil Pressure Switch Lead
14. Front
15. Run the fuel tank drain hose to the inside of the water pipe.
16. Run the air cleaner drain hose between the water pipe and alternator cover.
17. Run the alternator lead to the inside of the neutral switch/oil pressure switch lead.
18. Alternator Lead
19. Run the air cleaner drain hose to the inside of the neutral switch/oil pressure switch lead and
alternator lead.
20. Neutral Switch/Oil Pressure Switch Lead
Loading ...
Loading ...
Loading ...