Loading ...
Loading ...
Loading ...
PERIODIC MAINTENANCE 2-11
Torque and Locking Agent
Torque
Fastener
N·m kgf·m ft·lb
Remarks
Meter Unit Mounting Screws 1.2 0.12 11 in·lb
Oxygen Sensor (Equipped Models)
44 4.5 32
Switch Housing Screws
3.5 0.36 31 in·lb
Alternator Cover Bolt
s (Engine No. ∼
ZRT00DE013356)
9.8 1.0 87 in·lb
Alternator Cover Bolts 12 1.2 106 in·lb
Alternator Lead Hold
ing Plate Bolt
12 1.2 106 in·lb L
Alternator Rotor Bolt 155 15.8 114
Brush Holder Screw 3.8 0.39 34 in·lb
Crankshaft Sensor Bolts 5.9 0.60 52 in·lb
Crankshaft Sensor Cover Bolts (Engine No. ∼
ZRT00DE013356)
9.8 1.0 87 in·lb
Crankshaft Sensor Cover Bolts 12 1.2 106 in·lb
Oil Pressure Switch 15 1.5 11 SS
Oil Pressure Switch Terminal Bolt 2.0 0.20 18 in·lb G
Spark Plugs 13 1.3 115 in·lb
Starter Motor Through Bolts 4.9 0.50 43 in·lb
Starter Motor Cable Terminal Nut 5.9 0.60 52 in·lb
Starter Motor Mounting Bolts 9.8 1.0 87 in·lb
Starter Motor Terminal Locknut
11 1.1 97 in·lb
Stator Coil Bolts
12 1.2 106 in·lb L
Timing Rotor Bolt 39 4.0 29
Water Temperature Sensor 30 3.1 22
Engine Ground Cable Terminal Bolt 9.8 1.0 87 in·lb
Neutral Switch 15 1.5 11
Sidestand Switch Bolt
8.8 0.90 78 in·lb L
Speed Sensor Mounting Bolt
6.9 0.70 61 in·lb L
The table below, relating tightening torque to thread diameter, lists the basic torque for the bolts and
nuts. Use this table for only the bolts and nuts which do not require a specific torque value. All of the
values are for use with dry solvent-cleaned threads.
Basic Torque for General Fasteners
Torque
Threads Diameter
(mm)
N·m kgf·m ft·lb
5 3.4 ∼ 4.9 0.35 ∼ 0.50 30 ∼ 43 in·lb
6 5.9 ∼ 7.8 0.60 ∼ 0.80 52 ∼ 69 in·lb
8 14
∼ 19
1.
4 ∼ 1.9
10
.0 ∼ 13.5
10 25 ∼ 34 2.6 ∼ 3.5 19.0 ∼ 25
12 44 ∼ 61 4.5 ∼ 6.2 33 ∼ 45
14 73 ∼ 98 7.4 ∼ 10.0 54 ∼ 72
16 115 ∼ 155 11.5 ∼ 16.0 83 ∼ 115
18 165 ∼ 225 17.0 ∼ 23.0 125 ∼ 165
20 225 ∼ 325 23.0 ∼ 33.0 165 ∼ 240
Loading ...
Loading ...
Loading ...