Loading ...
Loading ...
Loading ...
BRAKES 12-15
Calipers
Caliper Installation
•
Install the caliper and brake hose lower end.
○
For the front caliper, install the collars [A] on the fork leg
and fit the holes [B] of the front caliper to the collars.
○
Replace the washers on each side of hose fitting with new
ones.
•
Tighten:
Torque - Caliper Mounting Bolts
Front: 34 N·m (3.5 kgf·m, 25 ft·lb)
Rear: 25 N·m (2.5 kgf·m, 18 ft·lb)
Brake Hose Banjo Bolts: 25 N·m (2.5 kgf·m, 18
ft·lb)
•
Bleed the brake line (see Brake Line Bleeding).
•
Check the brake for good braking power, no brake drag,
and no fluid leakage.
WARNING
After servicing, it takes several applications of the
brake lever or pedal before the brake pads contact
the disc, which could result in increased stopping
distance and cause an accident resulting in injury
or death. Do not attempt to ride the motorcycle until
a firm brake lever or pedal is obtained by pumping
the lever or pedal until the pads are against the disc.
Front Caliper Disassembly
•
Refer to the Caliper Rubber Parts Replacement in the Pe-
riodic Maintenance chapter.
Front Caliper Assembly
•
Refer to the Caliper Rubber Parts Replacement in the Pe-
riodic Maintenance chapter.
Rear Caliper Disassembly
•
Refer to the Caliper Rubber Parts Replacement in the Pe-
riodic Maintenance chapter.
Rear Caliper Assembly
•
Refer to the Caliper Rubber Parts Replacement in the Pe-
riodic Maintenance chapter.
Loading ...
Loading ...
Loading ...