Loading ...
Loading ...
Loading ...
PERIODIC MAINTENANCE 2-43
Periodic Maintenance Procedures
Electrical System
Lights and Switches Operation Inspection
First Step
•
Turn on the ignition switch.
•
The following lights should go on according to below table.
City Light [A]
goes on
Taillight [B]
goes on
License Plate Light [C]
goes on
Meter Panel LCD [D]
goes on
Neutral Indicator Light (LED) [E]
goes on
Warning Symbol and Warning Indicator Light (LED)
[F]
flash
ABS Indicator Light (LED) [G] (ABS Equipped Models)
goes on
If the light does not go on, inspect or replace the following
item.
Battery (see Charging Condition Inspection in the Elec-
trical System chapter)
Main Fuse 30 A and Taillight Fuse 10 A (see Fuse In-
spection in the Electrical System chapter)
Applicable Bulb (see Wiring Diagram in the Electrical
System chapter)
Meter Unit for Meter Panel LCD (see Electronic Com-
bination Meter Unit Inspection in the Electrical System
chapter)
Meter Unit for Neutral Indicator Light (LED) (see Meter
Unit Inspection in the Electrical System chapter)
Meter Unit for Warning Indicator Light (LED) (see Meter
Unit Inspection in the Electrical System chapter)
ECU (see ECU Power Supply Inspection in the Fuel Sys-
tem (DFI) chapter)
Ignition Switch (see Switch Inspection in the Electrical
System chapter)
Neutral Switch (see Switch Inspection in the Electrical
System chapter)
Harness (see Wiring Inspection in the Electrical System
chapter)
ABS Indicator Light (LED) (ABS Equipped Models) (see
ABS Indicator Light (LED) Inspection in the Brakes chap-
ter)
•
Turn off the ignition switch.
•
The all lights should go off.
If the light does not go off, replace the ignition switch.
Second Step (
∼ ZR1000DC/EC)
•
Turn the ignition switch to P (Park) position.
•
The city light, taillight and license plate light should go on.
If the light does not go on, inspect or replace the following
item.
Ignition Switch (see Switch Inspection in the Electrical
System chapter)
Loading ...
Loading ...
Loading ...