Loading ...
Loading ...
Loading ...
5-28 ENGINE TOP END
Cylinder Head
•
Replace the cylinder head gasket [A] with a new one.
•
Install the dowel pins [B] and cylinder head gasket.
•
Replace the cylinder head bolt washers [A] with new ones.
•
Apply molybdenum disulfide oil solution to both sides [B]
of the cylinder head bolt washers and threads [C] of the
bolts.
•
Tighten the M10 cylinder head bolts following the tighten-
ing sequence [1 ∼ 10].
Torque - Cylinder Head Bolts (M10):
First
20 N·m (2.0 kgf·m, 15 ft·lb)
Final
54 N·m (5.5 kgf·m, 40 ft·lb)
•
Tighten:
Torque - Cylinder Head Bolts (M6) [A]: 12 N·m (1.2 kgf·m,
106 in·lb)
Upper Adjusting Collar: 9.8 N·m (1.0 kgf·m, 87
in·lb)
Upper Adjusting Collar Locknut: 4.9 N·m (5.0
kgf·m, 36 ft·lb)
Upper Engine Mounting Bolts: 44 N·m (4.5 kgf·m,
32 ft·lb)
Lower Engine Bracket Bolts: 44 N·m (4.5 kgf·m,
32 ft·lb)
Loading ...
Loading ...
Loading ...