Loading ...
Loading ...
Loading ...
16-52 ELECTRICAL SYSTEM
Electric Starter System
•
Align the marks [A] to assemble the yoke and the end
cover [B].
•
Tighten:
Torque - Starter Motor Through Bolts [A]: 4.9 N·m (0.50
kgf·m, 43 in·lb)
Brush Inspection
•
Measure the length of each brushes [A].
If any is worn down to the service limit, replace the brush
assy.
Starter Motor Brush Length
Standard: 12 mm (0.47 in.)
Service Limit: 6.5 mm (0.26 in.)
Commutator Cleaning and Inspection
•
Clean the metallic debris off the between commutator
segments [A].
NOTE
○
Do not use emery or sand paper on the commutator.
•
Check the commutator for damage or abnormal wear.
Replace the starter motor with a new one if there is any
damage or wear.
•
Visually inspect the commutator segments for discol-
oration.
Replace the starter motor with a new one if discoloration
is noticed.
Loading ...
Loading ...
Loading ...