Loading ...
Loading ...
Loading ...
PERIODIC MAINTENANCE 2-33
Periodic Maintenance Procedures
Drive Chain Slack Adjustment
•
Loosen the left and right chain adjuster clamp bolts [A].
•
Using an Allen wrench, turn the adjusters [B] forward or
rearward until the drive chain has the correct amount of
chain slack.
•
Tighten:
Torque - Chain Adjuster Clamp Bolts: 64 N·m (6.5 kgf·m, 47
ft·lb)
Wheel Alignment Inspection
•
Check that the left and right notches [A] the swingarm
should point to the same marks or positions [B] on the
left and right adjuster.
If they do not, adjust the chain slack (see Drive Chain
Slack Adjustment) and align the wheel alignment.
WARNING
Misalignment of the wheel will result in abnormal
wear and may result in an unsafe riding condition.
Be sure the wheel is properly aligned.
Wheel Alignment Adjustment
•
Remove the right retaining ring [A] from the axle shaft.
•
Loosen the axle nut [B].
•
Loosen the right chain adjuster clamp bolt [C], and turn
the right chain adjuster [D] so that the left and right
notches on the swingarm may point to the same marks
or positions on the left and right adjusters.
•
Tighten:
Torque - Chain Adjuster Clamp Bolt: 64 N·m (6.5 kgf·m, 47
ft·lb)
Rear Axle Nut: 98 N·m (10 kgf·m, 72 ft·lb)
Loading ...
Loading ...
Loading ...