Loading ...
Loading ...
Loading ...
7-14 ENGINE LUBRICATION SYSTEM
Oil Cooler
Oil Cooler Removal
•
Remove:
Coolant (Drain, see Coolant Change in the Periodic
Maintenance chapter)
Engine Oil (Drain, see Engine Oil Change in the Periodic
Maintenance chapter)
Water Hose Clamp Screws (Loosen) [A]
Water Hoses [B]
Oil Cooler Bolts [C]
Oil Cooler [D]
Oil Cooler Installation
•
Replace the O-ring [A] with a new one.
•
Apply grease to the O-ring and install it.
•
Install the oil cooler.
•
Tighten:
Torque - Oil Cooler Bolts: 12 N·m (1.2 kgf·m, 106 in·lb)
•
Install the water hoses [A] and clamps as shown in the
figure.
•
Tighten:
Torque - Radiator (Water) Hose Clamp Screws [B]: 3.0 N·m
(0.31 kgf·m, 27 in·lb)
•
Install the removed parts (see appropriate chapters).
Loading ...
Loading ...
Loading ...