Loading ...
Loading ...
Loading ...
ELECTRICAL SYSTEM 16-91
Immobilizer System (Equipped Models), ZR1000DA/EA
User Key Collation Error
•
The user key 1 is registered in the ECU.
○
The warning indicator light (LED) and the immobilizer
warning symbol [A] blink 2 times and stop for 1 second
and then repeat this cycle.
•
Turn off the ignition switch and remove the user key 1.
○
The immobilizer warning symbol [A] disappears.
○
The warning indicator light (LED) [B] then blinks for 15
seconds.
○
After 15 seconds, the ECU ends the registration mode
and stops blinking the warning indicator light (LED).
NOTE
○
This procedure registered the master key and one user
key.
If more keys registration is needed, go to next procedures
within the registration mode.
•
Insert the user key 2 into the ignition switch, and turn it to
ON.
○
If there is any problem in the registration, the warning
indicator light (LED) and the immobilizer warning symbol
[A] blink to display the collation error code.
Immobilizer Amplifier Failure
Loading ...
Loading ...
Loading ...