Loading ...
Loading ...
Loading ...
WHEELS/TIRES 10-7
Wheels (Rims)
Front Wheel Removal
•
Remove:
Front Caliper Mounting Bolts [A] (Both Sides)
Front Calipers [B] (Both Sides)
Rear Lower Fairing (see Rear Lower Fairing Removal in
the Frame chapter)
Front Fender (see Front Fender Removal in the Frame
chapter)
•
For the ABS equipped Models, remove the bolt [C] and
front wheel rotation sensor [D].
•
Loosen:
Front Axle Clamp Bolt [A] (Loosen)
Front Axle [B]
•
For the oxygen sensor equipped Models, remove the
oxygen sensor (see Oxygen Sensor Removal (Equipped
Models) in the Electrical System chapter).
•
Raise the front wheel off the ground.
Special Tools - Jack [A]: 57001-1238
Attachment Jack [B]: 57001-1252
Jack Attachment [C]: 57001-1608
•
Pull out the axle to the right and drop the front wheel out
of the forks.
NOTICE
Do not lay the wheel down on one of the discs. This
can damage or warp the disc. Place blocks un-
der the wheel so that the disc does not touch the
ground.
Front Wheel Installation
NOTE
○
The direction of the wheel rotation [A] is shown by an
arrow [B] on the wheel spoke.
•
Check the wheel rotation mark on the front wheel and
install it.
Loading ...
Loading ...
Loading ...