Loading ...
Loading ...
Loading ...
Fuses and bulbs
Dipped beam headlight
Fig. 104
In the engine compartment: remove
the lid.
Fig. 105 In the engine compartment: dipped
beam l
amp
.
–
R
aise the bonnet.
–
Mo
v
e the loop
›››
Fig. 104
1
in the direc-
tion of the arr
o
w and r
emove the cover.
–
Remove the bulb connector
›››
Fig. 105
2
.
–
Unclip the retainer spring
›
›
›
Fig. 105
3
pressing inwards to the right.
–
Extract the bulb and fit the replacement so
that the lug on the base fits int
o the r
ecess
on the r
eflector.
–
Fit the connector.
–
Fit the cover and close the strap. Make sure
that the gasket sits well on the casing cover
during the operation.
–
Check whether the new bulb is working.
Turn signal light and DRL(daytime
running light)/sidelight
1)
Fig. 106
In the engine compartment: turn sig-
nal light bulb
1
and DRL (daytime running
light) bulb
2
.
–
Raise the bonnet.
–
Turn the bulb holder
›
›
›
Fig. 106
1
or
2
to
the l
eft and pull.
–
R
emo
ve the bulb by pressing on the bulb
holder and turning it anticlockwise at the
same time.
–
Installation involves all of the above steps in
reverse sequence.
1)
In headlight versions with LED DRL, this light
source cannot be repl
aced. It is designed to last
the length of the car’s service life. In case of fail-
ure, go to an authorised workshop to have it re-
placed.
95
Loading ...
Loading ...
Loading ...