Loading ...
Loading ...
Loading ...
Operation
Convenience opening and closing
Use the convenience opening/closing func-
tion to easily open/close all the windo
ws and
the sliding/tilting sunroof* from the outside.
Convenience open function
–
Press and hold the button on the remote
control key until all the windows and the
sliding/tilting sunroof* have reached the
desired position, or
–
First unlock the vehicle using the button
on the remot
e control key and then keep
the key in the driver door lock until all the
windows and the sliding/tilting sunroof*
have reached the required position.
Convenience close function
–
Press and hold button on the remote
control key until all the windows and the
sliding/tilting sunroof* are closed
›››
, or
–
Keep the key in the driver door in the "lock"
position until all the windo
ws and the slid-
ing/tilting sunr
oof* ar
e closed.
Programming convenience opening in the
Easy Connect*
–
Select:
/ SETTINGS> Opening and
closing > Electric windows > Con-
venience opening, t
o choose betw
een all
the windo
ws (All), only the driver’s window
(Driver) or none (Deactivated).
WARNING
●
Take car
e when closing the sliding/tilting
sunroof* and windows. There is a risk of
suffering injury.
●
For safety reasons, you should only use
the remote control open and close func-
tions within about 2 metres of the vehicle.
To avoid injuries, always keep an eye on the
windows and the sliding/tilting sunroof*
when pressing the button to close them.
The windows stop moving as soon as the
button is released.
One-touch opening and closing*
One-touch opening and closing means you
do not hav
e t
o hol
d down the button.
Buttons
›››
Fig. 140
1
,
2
,
3
and
4
have
tw
o positions f
or opening windo
ws and two
for closing them. This makes it easier to open
and close windows to the desired position.
One-touch closing
–
Pull up the window button briefly up to the
second position. The window closes fully.
One-touch opening
–
Push down the window button briefly up to
the second position. The window opens
fully.
Resetting one-touch opening and closing
–
The automatic open and close function will
not work if the battery has been temporarily
disconnected. The function can be restored
as follows:
–
Close the window as far as it will go by lift-
ing and holding the electric window switch.
–
Release the switch and then lift it again for 1
second. This will re-enable the automatic
function.
If you push (or pull) a button to the first stage,
the window will open (or close) until you re-
lease the button. If you push or lift the button
briefly to the second stage, the window will
open (one-touch opening) or close (one-
touch closing) automatically. If you operate
the button while the window is opening or
closing, it stops at this position.
Sunroof*
Introduction
WARNING
If the sunroof is used negligently or without
paying due attention, it can cause serious
injury.
138
Loading ...
Loading ...
Loading ...