Loading ...
Loading ...
Loading ...
Driving
light up on the instrument panel, and the pro-
gr
ammed speed and ACC st
at
us will be dis-
played
›››
Fig. 236.
What ACC settings are possible?
●
Setting your speed
›››
page 266.
●
Setting your distance
›››
page 266.
●
Connecting and activating the ACC
›››
page 266.
●
Disconnecting and deactivating the ACC
›››
page 266.
●
Adjusting the default distance level at the
start of your journey
›››
page 266.
●
Adjusting the driving profile
›››
page 267.
●
Conditions in which the ACC does not re-
act
›››
page 267.
Setting speed
To set your speed, move the third lever loca-
ted in position
1
upwards or downwards until
the desir
ed speed is sho
wn on the instrument
panel displ
ay. The speed adjustment is made
at 10 km/h (6 mph) intervals.
Once you are driving, if you wish to set the
current speed as the vehicle’s cruise speed
and activate the ACC, press the
›››
Fig. 239 button. If you wish to increase or
reduce speed by intervals of 1 km/h (0.6
mph), move the lever to position
2
›››
Fig. 238 or pr
ess the butt
on, r
espec-
tively.
The set speed can be changed when the ve-
hicle is stopped or during driving, as you like.
Any modification to the programmed speed
will be shown on the bottom left part of the
instrument panel display
›››
Fig. 236.
Setting your distance level
To increase/reduce the distance level, press
the rocker switch towards the left/right
›››
Fig. 239
A
.
The instrument panel displ
ay sho
ws the mod-
ification of the dist
ance level. There are 5 dis-
tance levels to choose from. SEAT recom-
mends level 3. The set distance can be
changed when the vehicle is stopped or dur-
ing driving, as you like
›››
.
Connecting and activ
ating the ACC
T
o connect and activ
ate the ACC, the posi-
tion of the gearbox selector lever, the vehicle
speed and the position of the third level of the
ACC must all be taken into account.
●
With a manual transmission, the gearbox
selector lever must be in any gear except
first, and the speed must be higher than ap-
proximately 30 km/h. With an automatic
transmission, the gearbox selector lever must
be in position D or S.
●
To activate the ACC, with the third lever in
position
1
press the butt
on or mo
v
e the
third lever of the ACC to position
2
›››
Fig. 238. At this point, the image of the
ACC on the instrument panel display will
s
wit
ch t
o Active mode
›››
Fig. 236.
When the ACC function is active, the vehicle
travels at a set speed and distance from the
vehicle ahead. Both speed and distance can
be changed at any time.
Disconnecting and deactivating the ACC
To disconnect the ACC move the lever to the
0
position
›
›
›
Fig. 238 (engaged). An ACC
deactivated message appears and the
function is totally deactivated.
If you do not wish to disconnect the ACC, just
to switch it temporarily to inactive mode
(Standby), move the third lever to position
3
›››
Fig. 238 or pr
ess the br
ak
e pedal.
It will also switch to inactive mode (Standby)
if the vehicle is stopped and the driver door is
opened.
Adjusting the default distance level at the
start of your journey
In wet road conditions, you should always set
a larger distance with regard to the vehicle in
front than when driving in dry conditions.
The following distances can be preselected:
●
Very short
●
Short
●
Media
266
Loading ...
Loading ...
Loading ...