Loading ...
Loading ...
Loading ...
Technical data
Technical data
T
echnical specifications
Impor
t
ant information
Important
The information in the vehicle documentation
always t
akes precedence over the informa-
tion in this Instruction Manual.
All technical specifications provided in this
documentation are valid for the standard
model in Spain.
The figures may be different depending
whether additional equipment is fitted, for dif-
ferent models, for special vehicles and for
other countries.
Abbreviations used in the technical speci-
fications section
kW Kilowatt, engine power measurement.
PS
Pferdestärke (horsepower), formerly
used to denote engine po
wer.
rpm, 1/min Revolutions per minute - engine speed.
Nm Newton metres, unit of engine torque.
CZ
Cetane number, indication of the die-
sel combustion power
.
RON
Research octane number, indication of
the knock resistance of petr
ol.
Vehicle identification data
Fig. 276 Chassis number.
Chassis number
The VIN is l
ocat
ed in the Easy Connect and
under the windscr
een, on the driver side
›››
Fig. 276. Additionally, the chassis number
is located in the engine compartment, on the
right-hand side. The number is engraved on
the top side rail, and is partially covered.
VIN in the Easy Connect
●
Select:
/ butt
on > function button
SETTINGS > Service > Chassis number.
Identification pl
at
e
The identification plate is located on the rear
pillar of the right-hand front door. Vehicles for
certain export countries do not have an iden-
tification plate.
Identifying letters
The identifying letters of the engine can be
viewed on the instrument panel when the en-
gine is switched off and the ignition is on.
●
Hold down the button on the dash
panel for more than 15 seconds.
Fuel consumption data
Fuel consumption
Approved consumption values are derived
fr
om measur
ements perf
ormed or supervised
by certified EU laboratories, according to the
legislation in force at the time (for more
332
Loading ...
Loading ...
Loading ...