Loading ...
Loading ...
Loading ...
Driving
as high kerbs that could damage the bot-
tom of the vehicl
e are not detected either.
●
If the first warning from the Parking Aid is
ignored, the vehicle could suffer considera-
ble damage.
●
The knocks or damage on the radiator
grille, bumper, wheel arch and vehicle un-
derbody can adjust the orientation of the
sensors. This can affect the parking aid
function. In this case, have the function
checked by a specialised workshop.
●
A registration plate or plate holder on the
front with larger than the space for the reg-
istration plate, or a registration plate that is
curved or warped can cause:
–
false detections,
–
loss of sensor visibility.
Note
●
In certain sit
uations, the system can give
a warning even though there is no obstacle
in the detected area, e.g:
–
with rough or cobbled floors or ground
with long grass;
–
with external ultrasound sources, such
as cleaning vehicles or other vehicles
equipped with ultrasound systems;
–
in downpours, intense snow, hail or
dense exhaust gases,
–
if the number plate is not perfectly se-
cured to the bumper surface,
–
or in locations such as the bro
w of a
hill.
●
In order to guarantee good system oper-
ation, keep the ultrasound sensors clean,
free of snow or ice, and do not cover them
with adhesives or other objects.
●
If you use high-pressure or vapour equip-
ment to clean the ultrasound sensors, ap-
ply it directly only very briefly and always
from a distance of more than 10 cm.
●
Retrofitting of accessories to the vehicle,
such as a bicycle rack, may interfere with
the operation of the Parking Aid.
●
Fitting certain accessories to the front of
the vehicle, such as a plate holder with ad-
vertising, may interfere with the operation
of the Park Assist.
●
In order to familiarise yourself with the
system, it is advised that you practice park-
ing in an area or car park that is free from
traffic. There must be good weather and
light conditions.
●
The volume and tone of the warnings can
be modified, in addition to the indications
›››
page 278.
●
In vehicles without an infotainment sys-
tem, these parameters can be modified in a
SEAT Official Service or in a specialised
workshop.
●
Please observe information on towing a
trailer
›››
page 278.
●
The display on the Easy Connect screen
shows a slight time delay.
Parking System Plus*
Description
Fig. 244
Represented area.
The P
arking System Plus assists the driver
by visually and audibly w
arning them about
obst
acles detected in front of and behind the
vehicle.
There are sensors integrated in the front and
rear bumpers. When they detect an obstacle,
you are alerted by audible warnings and vis-
ually on the Easy Connect system.
In the event of danger of collision with an ob-
stacle, it is possible to know if the obstacle is
in front of the vehicle or behind it by choosing
different sounds.
Make particularly sure that the sensors are
not covered by adhesives, residues and the
like, as this could affect the system's opera-
tion. Cleaning instructions
›››
page 323.
274
Loading ...
Loading ...
Loading ...