Loading ...
Loading ...
Loading ...
Checking and refilling levels
●
L
eav
e the ignition on f
or at least 30 sec-
onds for the system to detect the fluid load.
●
Make sure you wait for at least 30 seconds
before starting the engine!
Refilling the dispenser with AdBlue
Valid for vehicles with selective catalytic re-
duction.
●
Open the tank cap.
●
Turn the SCR tank cap anti-clockwise
›››
Fig. 268.
●
Add AdBlue until the nozzle stops for the
first time.
●
Close the SCR tube by turning it clockwise
until you hear a click.
WARNING
AdBlue
®
should only be stor
ed in the origi-
nal container, which should be tightly
closed and kept in a safe place.
●
Never keep AdBlue
®
in empty food con-
tainers, bottles or other similar containers.
Other people may confuse it for other
products.
●
Keep AdBlue
®
out of the reach of chil-
dren.
CAUTION
●
When refilling, the nozzl
e grip should be
aligned downward. Otherwise the nozzle
will not connect automatically.
●
Do not try to add any more additive after
the nozzle has stopped for the first time.
The AdBlue tank could overflow and AdBlue
could spill out.
●
Only use AdBlue
®
that complies with ISO
22241-1. Only use original containers.
●
Never mix AdBlue
®
with water, fuel or ad-
ditives. Any type of damage caused by
such a mixture will not be covered by the
warranty.
●
Never pour AdBlue
®
into the fuel tank.
This could result in engine damage.
●
Do not carry the refill bottle inside the
vehicle. If there is a leak (due to tempera-
ture changes or damage to the bottle), the
AdBlue
®
may damage the vehicle.
For the sake of the environment
Dispose of the refill bottle in an environ-
ment-friendly manner.
Note
You can buy refill bottles that are adequate
for AdBlue
®
use at SEAT dealerships.
Working in the engine com-
par
tment
Saf
et
y notes for work in the engine
compartment
Read the additional information carefully
›››
page 17
Before starting any work on the engine or in
the engine compartment:
1. Switch off the engine and remove the key
from the ignition.
2. Apply the handbr
ake.
3. Move the gear lever to neutral or the se-
lector lever to position P.
4. Wait for the engine to cool down.
5. Keep children away from the vehicle.
6. Raise the bonnet
›››
page 17.
You should not do any work in the engine
compartment unless you know exactly how
to carry out the jobs and have the correct
tools! Have the work carried out by a special-
ised workshop if you are uncertain.
All service fluids and consumables, e.g. cool-
ant, engine oil, spark plugs and batteries, are
under constant development. SEAT provides
a constant flow of information to Technical
Services concerning modifications. For this
»
301
Loading ...
Loading ...
Loading ...