Loading ...
Loading ...
Loading ...
Airbag system
●
Insert the k
ey int
o the sl
ot of the switch for
deactivating the front passenger airbag
›››
Fig. 96. About 3/4 of the key should enter;
this is as far as it will go.
●
Turn the key gently to the position. If you
have difficulty, ensure that you have inserted
the key as far as it will go.
●
Close the front passenger door.
●
Check, with the ignition switched on, that
the control lamp remains lit where it
says in the centre of the
dash panel
›››
Fig. 97.
Connect the front passenger front airbag
●
Switch the ignition off.
●
Open the front passenger door.
●
Insert the key into the slot of the switch for
deactivating the front passenger airbag
›››
Fig. 96. About 3/4 of the key should enter,
as far as it will go.
●
Turn the key gently to the position. If you
have difficulty, ensure that you have inserted
the key as far as it will go.
●
Close the front passenger door.
●
Check, with the ignition switched on, that
the control lamp is not lit where it says
in the centre of the dash
panel
›››
Fig. 97. The control lamp lights
up for 60 seconds and then goes off.
WARNING
●
The driver of the vehicl
e is responsible for
disabling or switching on the airbag.
●
Always switch off the ignition before dis-
abling the front passenger airbag! Failure
to do so could result in a fault in the airbag
deactivation system.
●
Never leave the key in the airbag disa-
bling switch as it could get damaged or en-
able or disable the airbag during driving.
●
If for any reason an airbag is deactivated,
reactivate it as soon as possible so that it
can fulfil its protective function.
Airbag system control lamps
It lights up on the combi-instru-
ment
Fault in airbag system and seat belt tensioners.
Have the system check
ed immediately by a special-
ised workshop.
It lights up on the dash panel
Front passenger front airbag disabled.
Check whether the airbag should remain disabl
ed
It lights up on the dash panel
Front passenger airbag enabled.
The control lamp switches off automatically 60 sec-
onds after the ignition is switched on
Several warning and control lamps light up
f
or a f
e
w seconds when the ignition is switch-
ed on, signalling that the function is being
verified. They will switch off after a few sec-
onds.
If the airbag and seat belt tensioner system
control lamp remains on or flashes, it indi-
cates a malfunction in the airbag and seat
belt tensioner system
›››
. Have the system
check
ed immediat
ely by a specialised w
ork-
shop.
If the front passenger airbag is deactivated,
the warning lamp re-
mains lit on the dash panel to remind you that
the airbag is deactivated. If, with the front
passenger airbag deactivated, this lamp
does not remain lit or if it is lit together with
the control lamp on the dash panel, there
is a fault in the airbag system
›››
. If the con-
tr
ol l
amp is fl
ashing, there is a fault in the dis-
abling of the airbag system
›››
. Have the
syst
em check
ed immediat
ely by a special-
ised workshop.
WARNING
In the event of a fault in the airbag and seat
belt tensioner system, the airbags and seat
belts may not trigger corr
ectly, may fail to
trigger or may even trigger unexpectedly.
●
The vehicle occupants run the risk of sus-
taining severe or fatal injuries. Have the
system checked immediately by a special-
ised workshop.
»
79
Loading ...
Loading ...
Loading ...