Loading ...
Loading ...
Loading ...
Operation
●
Set the air distribution r
egul
at
or
›››
Fig. 171
3
to the air flow configuration de-
sir
ed:
(towards the windscreen), (to-
wards the chest), (towards the footwell)
and (towards the windscreen and foot-
well).
Interior cooling
When the air conditioning is switched on, the
temperature and the air humidity go down.
This way, if the outside humidity is extreme,
the air conditioning prevents the misting of
the windows and therefore, comfort is im-
proved.
●
Turn on the cooling system using the
button (the button light turns on).
●
Turn the temperature control switch until
the desired interior temperature is reached.
●
Turn the blower switch to any of the settings
1-4.
●
Set the air distribution control to the air flow
configuration desired: (towards the wind-
screen), (towards the chest), (towards
the footwell) and (towards the windscreen
and footwell).
Demisting the windscreen
●
Turn air distribution to .
●
Turn the fan control to one of the two levels
depending on the speed required.
●
Rotate the temperature control to the de-
sired level of comfort.
●
Close the central outlets.
●
Open and turn the side outlets towards the
windows.
If the air conditioning does not work, this may
be due to the following reasons:
●
The engine is stationary.
●
The fan blower is switched off.
●
The outside temperature is lower than +3°C
(+37°F).
●
The air conditioning system compressor
has been temporarily switched off because
of an increased engine coolant temperature.
●
The air conditioner fuse is faulty.
●
Another fault in the vehicle. Have the air
conditioning checked by a specialised work-
shop.
170
Loading ...
Loading ...
Loading ...