Loading ...
Loading ...
Loading ...
Emergencies
Contents of the tyre mobility sys-
t
em*
Fig. 98
Standard display: contents of the anti-
punct
ur
e kit.
The anti-puncture kit is located underneath
the fl
oor co
v
ering in the luggage compart-
ment. It includes the following components
›››
Fig. 98:
Valve insert remover
A sticker to be adhered to the instrument
cluster, within the driver's visual field, to
remind that the maximum advisable
speed “max. 80 km/h” or “max. 50 mph”
Filler tube with cap
Air compressor
ON/OFF switch
1
2
3
4
5
Air bleed screw (it can also be integrated
in the infl
at
or t
ube).
Warning provided by tyre pressure moni-
toring system (it can also be integrated in
the inflator tube).
Tube for inflating tyres
12 volt connector
Bottle of sealant
Spare tyre valve
The valve insert remover
1
has a gap at
the l
o
w
er end for the valve insert. The valve
insert can only be screwed or unscrewed in
this way. This also applies to its replacement
part
11
.
WARNING
When inflating the wheel, the air compres-
sor and the inflator t
ube may become hot.
●
Protect hands and skin from hot parts.
●
Do not place the hot flexible inflator tube
or hot air compressor on flammable mate-
rial.
●
Allow them to cool before storing the de-
vice.
●
If it is not possible to inflate the tyre to at
least 2.0 bars (29 psi / 200 kPa), the tyre is
too badly damaged. The sealant is not in a
good condition to seal the tyre. Do not con-
tinue driving. Seek specialist assistance.
6
7
8
9
10
11
CAUTION
Switch off the air compressor after a maxi-
mum of 8 operational minutes t
o avoid
overheating! Before switching on the air
compressor again, let it cool for several mi-
nutes.
Check after 10 minutes of driving
Screw in the inflator tube
›››
Fig. 98
8
again
and check the pressure on the gauge
7
.
1.3 bar (19 psi / 130 kP
a) and l
o
wer:
●
Stop the vehicle! The tyre cannot be
sealed sufficiently with the tyre mobility set.
●
You should obtain professional assistance
›››
.
1.4 bar (20 psi / 140 kP
a) and higher:
●
Set the t
yr
e pressure to the correct value
again.
●
Carefully resume your journey, without ex-
ceeding 80 km/h (50 mph), until you reach
the nearest specialised workshop and re-
place the tyre.
WARNING
Driving with an unsealed tyre is dangerous
and can cause accidents and serious in-
jury.
86
Loading ...
Loading ...
Loading ...