Loading ...
Loading ...
Loading ...
Driving
Standby position
Fig. 254 Reserve position: position of the lever
and the r
el
ease bolt.
Standby position adjusted properly
●
Key
A
›
›
›
Fig. 254 is in the released posi-
tion (the part of the key with the holes is fac-
ing upwards).
●
Lever
B
›
›
›
Fig. 254 is in the bottom posi-
tion.
●
The release bolt
C
›
›
›
Fig. 254 can be
moved.
Thus adjusted, the detachable ball is ready
for installation.
CAUTION
The key cannot be removed or turned in the
standby position.
Assembling the detachable ball -
Step 1
Fig. 255 Fitting the detachable ball / Release
bolt in the depl
oyed position.
Fitting the detachable ball
●
Remove the hook housing cap
4
›››
Fig. 251 do
wnw
ar
ds.
●
Set the detachable ball to its standby posi-
tion
›››
page 283.
●
Grip the detachable ball from below
›››
Fig. 255 and insert it into the hook housing
following the direction of arrow
1
until it en-
gages audibly
›
›
›
.
L
e
v
er
A
turns aut
omatically in the direction
of arr
o
w
2
upwards, and the release bolt
B
moves outwards (the red and green part will
be visibl
e)
›
›
›
.
If l
e
v
er
A
does not turn automatically or the
r
el
ease bolt
B
does not come out, the de-
t
achabl
e ball shoul
d be removed by turning
the lever as far as possible downwards from
the housing cavity, and the detachable ball's
support surfaces and the cavity should then
be cleaned.
WARNING
●
When attaching the detachabl
e ball,
keep your hands well away from the reach
of the lever's rotation to avoid getting your
fingers caught.
●
Never try to pull the lever upwards by
force to turn the key. The detachable ball
would not be secured properly!
284
Loading ...
Loading ...
Loading ...