Loading ...
Loading ...
Loading ...
Towing bracket device
Assembling the detachable ball -
St
ep 2
Fig. 256
Locking the lock.
Fig. 257 Placing the cover over the lock.
Do not omit this first step
›
›
›
page 284, As-
sembling the detachable ball - Step 1!
●
Turn key
A
in the direction of arrow
1
until
the part of the k
ey with the hol
es r
eaches the
bottom position
›››
Fig. 256.
●
Remove the key in the direction of arrow
2
.
●
Place cover
B
in the lock in the direction of
arr
o
w
3
›
›
›
Fig. 257
›››
.
●
Check that the detachable ball is securely
att
ached
›
›
›
page 285, Checking proper at-
tachment.
CAUTION
●
After remo
ving the key, always place the
cover over the lever's lock. If the lock be-
comes soiled it will be impossible to insert
the key.
●
Keep the towing bracket device's housing
cavity clean at all times. Dirtiness can pre-
vent the detachable ball from being prop-
erly secured!
●
If the detachable ball is removed, always
place the cap on the hook's housing.
Checking proper attachment
Fig. 258
Detachable ball properly attached.
Whenever you go to use the detachable ball,
mak
e sur
e that it is pr
operly attached first.
Detachable ball properly attached.
●
The detachable ball will not fall out of the
housing cavity after a major “knock or jerk”.
●
Lever
A
›
›
›
Fig. 258 is fully raised.
●
The release bolt
B
›
›
›
Fig. 258 is sticking
fully out (the red and green part is visible).
●
The key has been removed.
●
Cover
C
›
›
›
Fig. 258 is placed over the
lock.
WARNING
●
When removing the det
achable ball,
keep your hands well away from the reach
of the lever's rotation to avoid getting your
fingers caught.
»
285
Loading ...
Loading ...
Loading ...