Loading ...
Loading ...
Loading ...
Self-help
Anchoring the front tow line
Fig. 99
Right side of the front bumper: remove
the lid.
Fig. 100 Right side of the front bumper: tow-
line anchor
age scr
e
wed in.
The front towline anchorage is only mounted
if the v
ehicl
e has t
o be towed.
There is a cover with an opening into which
the towline anchorage is screwed on the right
part of the front bumper.
–
Take the towline anchorage from the on-
board tool set.
–
Remove the front cover by pressing down
on its left-hand side
›››
Fig. 99.
–
Bolt the anchorage to its limit to the left, in
the direction of the arrow
›››
Fig. 100.
After use, unscrew the towline anchorage and
fit the cover back on the bumper. Put the tow-
line anchorage back in the vehicle tool kit.
The towline anchorage should always be
kept in the vehicle.
Rear towline anchorage
Fig. 101
Right side of the rear bumper: cover-
cap
.
Fig. 102 Right side of the rear bumper: towline
anchorage scre
wed in.
The rear towline anchorage should only be
mount
ed if you wish t
o t
ow another vehicle.
Vehicles with towline anchorage
On the right of the rear bumper there is a
cover which covers a threaded hole.
–
Take the towline anchorage out of the vehi-
cle tool set
›››
page 84.
–
To open the cover, press the top right side
›››
Fig. 101.
–
Screw the towline anchorage into the screw
connection as far as it will go
›››
Fig. 102
and tighten with the wheel brace.
After use, unscrew the towline anchorage and
put it back in the vehicle tool kit. Replace the
cover on the bumper. The towline anchorage
should always be kept in the vehicle.
»
89
Loading ...
Loading ...
Loading ...