Loading ...
Loading ...
Loading ...
Fuses and bulbs
To replace the xenon headlight
bulb
Fig. 109
In the engine compartment: turning
light co
v
er
.
Fig. 110
Turn signal bulb holder
1
and turning
light
2
.
There is no need to remove the headlight to
r
epl
ace bulbs.
Compl
ete operations only in the sequence
given:
Turn signals
1
Turning lights
2
1. Open the bonnet
›››
page 323.
2.
Rotate the cover
›››
Fig. 109 in the direction of
the arrow and remove it.
3.
Rotate the bulb holder
1
›››
Fig. 110 to the
left all the way and
pull it out backwards
together with the bulb.
Press the wire clip
downwar
ds and pull
the bulb holder
2
›››
Fig. 110 out t
ogeth-
er with the bulb.
4.
Depending on the model, the bulb is removed
directly from the bulb holder or it may need to
be rotated and then removed.
5.
Replace the faulty bulb with a new identical
bulb.
6.
Place the bulb hol
der
in the headlight and
rotate to the right all
the way.
Place the bulb holder
in the headlight and
pull the wire clip up-
wards until it clicks in-
to place.
7.
Rotate the cover
›››
Fig. 109 in the opposite di-
rection to the arrow as far as it will go.
Always seek the help of a specialist when
changing the Xenon dipped beam and main
beam headl
amps
›
›
›
in Introduction on
page 94.
Note
The illustrations show the left hand head-
light. The structure of the right hand side
headlight is symmetric.
Replacing the front bumper bulbs
Fig. 111
On the right side of the front bumper:
det
aching he headlights.
Fig. 112
Changing the bulbs in the headlights
Complete operations only in the sequence
giv
en:
»
97
Loading ...
Loading ...
Loading ...