Loading ...
Loading ...
Loading ...
The essentials
●
Insert the k
ey bl
ade int
o the lock cylinder to
unlock or lock the vehicle.
Special characteristics
●
The anti-theft alarm will remain active
when vehicles are unlocked. However, it is not
triggered
›››
page 116.
●
If the driver door is opened, the alarm will
be triggered.
●
Switch the ignition on. The electronic immo-
bilizer recognises a valid vehicle key and de-
activates the anti-theft alarm system.
›››
in Introduction on page 93
Note
The anti-theft alarm is not activated when
the vehicle is l
ocked manually using the
key shaft
›››
page 116.
Locking the passenger side door
and sliding doors manually
Fig. 6
On the front part of the sliding door:
emer
gency l
ocking, hidden behind a rubber
gask
et.
Fig. 7
Emergency locking of the vehicle using
the v
ehicl
e k
ey
The passenger side door and the sliding
doors can be l
ock
ed manually. The anti-theft
al
arm is not activated in this case.
●
Open the door.
●
Remove the rubber cap to the front of the
door. The rubber cap is marked with a lock
symbol
›››
Fig. 6.
●
Unfold the vehicle key blade
›››
page 114.
●
Insert the key shaft horizontally into the
opening and moved the coloured lever for-
ward
›››
Fig. 7.
●
Replace the rubber cap and close the door.
●
Check if the door is locked.
●
Carry out the same operation on the other
doors if necessary.
●
Have the vehicle checked by a specialised
workshop.
›››
in Introduction on page 93
Note
The doors can be opened and unlocked in-
dividually from the inside by pulling the
door handle
. To open, pull the inner door
release lever twice
›››
page 116.
11
Loading ...
Loading ...
Loading ...