Loading ...
Loading ...
Loading ...
Opening and closing
located on the exterior part of the driver or
passenger door handl
e until the windo
ws and
r
oof close.
Opening the doors by touching the sensor
surface on the handle takes places in ac-
cordance with the settings activated on the
menu Configuration - Convenience
›››
page 28.
CAUTION
The sensor surfaces on the door handles
could engage if hit with a wat
er jet or high
pressure steam if there is a valid vehicle
key in the nearby area. If at least one of the
windows is open and the sensor surface
B
on one of the handle permanently acti-
vates, all windo
ws will close. If the water jet
or steam is briefly moved away from the
sensor surface
A
on one of the handles
and then pointed at it again, all the win-
dows will pr
obably open
›››
page 120, Con-
venience functions.
Note
●
If the vehicle batt
ery has little or no
charge, or the vehicle key battery is almost
or entirely out of charge, you will probably
not be able to lock or unlock the vehicle
with the Keyless Access system. The vehi-
cle can be unlocked or locked manually
›››
page 93.
●
If there is no valid key inside the vehicle
or the system fails to detect one, a warning
will display on the dash panel screen. This
could happen if any other radio fr
equency
signal interferes with the key signal (e.g.
from a mobile device accessory) or if the
key is covered by another object (e.g. an
aluminium case).
●
If the sensors are very dirty, e.g. have a
layer of salt, how the sensors on the door
handles operate may be affected. If this is
the case, wash the vehicle
›››
page 352.
●
If the vehicle is equipped with an auto-
matic gearbox, it may only be locked in the
gear stick is in position P.
●
To improve the safety of your vehicle, the
remote control of the system is equipped
with a position sensor. If this remote control
does not detect movement for a certain
length of time, the system will conclude
that the vehicle cannot be opened (e.g. on
a night table) so it will be disabled.
Safe security system “Safe”
Function Necessary operations
Lock the vehicle and
activate the “Saf
e”
security system.
Press the button once on
the vehicle key.
Function Necessary operations
Lock the vehicle with-
out activating the
“Safe” securit
y sys-
tem.
Press the button twice
on
the vehicle key.
Touch the Keyless Access
close and ignition lock sen-
sor surf
ace located on the
exterior part of the door
handle twice
›››
page 119.
Press the central locking
button
on the driver door
once.
Depending on the vehicle, when switching the
ignition off
, a w
arning may be displ
ayed on
the dash panel screen stating that the “Safe”
security system is activated (SAFE Lock or
SAFELOCK).
Disabling the “Safe” security system
The “Safe” security system may be disabled
in any of the following ways:
●
Press the button on the vehicle key twice.
●
Touch the Keyless Access close and ignition
lock sensor surface located on the exterior
part of the door handle twice
›››
page 119.
●
Switch the ignition on.
●
Press the ignition push button of the Keyless
Access lock and ignition system.
»
121
Loading ...
Loading ...
Loading ...