Loading ...
Loading ...
Loading ...
Driver assistance systems
Parking
●
Stop the vehicle in front of a space and se-
l
ect r
e
verse gear.
●
Reverse slowly and turn the steering wheel
so that the yellow orientation lines guide you
towards the space
›››
Fig. 255
3
.
●
Align the vehicle straight in the parking
pl
ace using the help of the gr
een orient
ation
lines.
Parking parallel to the road (mode
2)
Fig. 256
Display: orientation lines and surfa-
ces f
or the space behind the v
ehicl
e
After applying the turn signal, the lines and
surf
aces not r
equir
ed are deleted.
Summary of the orientation points
Meaning of orientation lines and surfaces dis-
played on the screen
›››
Fig. 256. All of the
lengths of the orientation lines use a vehicle
located on a horizontal surface as reference.
Safety distance: road area located up to
40 cm behind the vehicle.
Vehicle side limit.
Turning point when parking. When the
yellow line touches the curb or another
limit of the parking space, the point for
changing direction (magnifying glass) will
have been reached.
Free space required to parallel park the
vehicle. The surface displayed must com-
pletely fit in the space.
Possible vehicle parked next to the curb.
Parking
●
Stop the vehicle 1 m away parallel to the
parking space and select reverse gear.
●
Switch on mode 2 on the navigation system
screen for parallel parking.
●
Slowly reverse and turn the steering wheel
so that the surface displayed yellow on the
screen stops in front of any obstacles
5
(e.g.
another v
ehicl
e).
●
T
urn the steering wheel fully towards the
space and reverse slowly.
1
2
3
4
5
●
When the yell
o
w line
3
touches the side
limit of the space
, e
.g. the bor
der or curb
(magnifying glass), turn the steering wheel
fully in the opposite direction.
●
Continue reversing until the vehicle is inside
the space, parallel to the road. Correct the
position if necessary.
Cruise control* (Cruise Con-
trol System - CCS)
Warning and control lamp
It lights up
This cruise control system maintains the set speed of
the vehicle
.
Several warning and control lamps light up
f
or a f
e
w seconds when the ignition is switch-
ed on, signalling that the function is being
verified. They will switch off after a few sec-
onds.
WARNING
Observe the safety warnings
›››
in Con-
trol and warning l
amps on page 109.
273
Loading ...
Loading ...
Loading ...