Loading ...
Loading ...
Loading ...
Introduction
General instructions for use
Intr
oduction
If the setup is changed, this may change the
display on the screen and in some cases, the
Inf
otainment system may behave in a manner
different to that described in this manual.
Note
●
Lightly pressing the buttons or briefly
pr
essing the touchscreen is sufficient to
operate the Infotainment system.
●
Not all listed function buttons and func-
tions described may be available due to
the device software used in your market.
The equipment is not faulty if a function
button is missing from the screen.
●
Due to country-specific legislation, cer-
tain functions may not be available on the
screen when the vehicle is travelling above
a certain speed.
●
Using a mobile telephone in the vehicle
may cause noise from the vehicle loud-
speakers.
●
Restrictions on the use of devices using
Bluetooth
®
technology may apply in some
countries. For further information, contact
the local authorities.
Rotary infotainment push knobs
and k
eys
Rotary/push knobs
The left-hand r
otary knob
›››
Fig. 203
1
is
the volume control or the on/off butt
on.
The right-hand rotary knob
›››
Fig. 203
5
is
the setup button.
Inf
otainment buttons
The infotainment buttons are shown in this in-
struction manual with the title “Infotainment
button” and a symbol with a blue title, for in-
stance, infotainment button MEDIA
›››
Fig. 203
2
.
The Inf
ot
ainment Syst
em buttons are used by
pressing them or pressing and holding.
Switching on and off
To manually switch the Infotainment system
on and off
, briefly
pr
ess the rotary knob
›››
Fig. 203
1
.
When s
wit
ching on, the syst
em starts-up with
the last set volume, provided that this does
not exceed the preset maximum start-up vol-
ume.
Depending on the equipment and country,
when switching off the engine or removing
the key from the ignition, the infotainment
system switches off automatically. If the Info-
tainment system is switched on again, it will
switch off automatically after approximately
30 minutes (switch-off delay).
Note
●
The Infotainment syst
em is a part of the
vehicle. It cannot be used in any other vehi-
cle.
●
If the battery has been disconnected, ac-
tivate the ignition before switching on the
Infotainment system.
Change base volume
Changes in volume are indicated by a “vol-
ume bar” on the scr
een. During that time
, no
oper
ations can be performed with the Info-
tainment system.
It is possible to preset certain volume settings
and adjustments.
Turn volume up
●
Turn the volume control clockwise.
●
OR: Rotate the left wheel on the multi-func-
tion steering wheel upwards.
Turn volume down
●
Turn the volume control anti-clockwise.
»
193
Loading ...
Loading ...
Loading ...