Loading ...
Loading ...
Loading ...
The essentials
Different mounting systems
Fig. 38 On rear seats: possible assemblies of chil-
dren seats.
Always secure child seats properly and safe-
ly in the v
ehicl
e accor
ding to the child seat
manufacturer's installation instructions.
Mounted child seats must rest correctly on
the vehicle's seat and must not move or rock
more than 2.5 cm (1 inch).
Child seats equipped for a Top Tether strap
must also be secured using the Top Tether re-
taining strap in the vehicle
›››
page 24. Only
secure the retaining belt to the rings fitted for
this purpose and identified as Top Tether. Not
all rings can be used with the Top Tether sys-
tem. Always tighten the Top Tether retaining
strap so that the child seat fits snugly against
the corresponding seat in the vehicle.
Specific mounting systems for each coun-
try
Europe: ISOFIX retaining rings and upper
retaining strap
›››
page 24 and
›››
page 24.
Three-point seat belt and upper retaining
strap
›››
page 23.
The systems include the child restraint
system mounting with an upper retaining
strap (Top Tether) and lower anchoring
points on the seat.
A
B
Securing child seats with the seat
belt
Securing the child seat using the seat belt
●
Please read and observe the child seat
manufactur
er's handling instructions.
●
Positioning the child seat on the seat ac-
cording to the manufacturer's instructions.
●
The seat belt height adjustment must be as
high as possible.
●
Fasten the seat belt or pass it around the
child seat structure in the manner described
in the manufacturer's instructions.
●
Make sure the seat belt is not twisted.
●
Insert the latch plate into the buckle for the
appropriate seat and push it do
wn until it is
securely locked with an audible click.
»
23
Loading ...
Loading ...
Loading ...