Loading ...
Loading ...
Loading ...
The essentials
●
Observ
e the manuf
act
urer's instructions
when installing and removing the child seat
›››
in Safety instructions on page 78.
●
Raise the head restraint behind the child
seat until it engages.
●
Secure the child seat to the lower anchor
points
›
›
›
page 24.
●
Pull the upper child seat retaining strap
back to the seat backrest of the rear seat,
below or on both sides of the head restraint
(depending on the child seat model).
●
Hook the upper retaining strap to the corre-
sponding retaining ring (for Top Tether) on the
back of the seat backrest on the rear seat
›››
Fig. 40.
●
Push the head restraint down as far as it will
go. Ensure that it does not interfere with the
seat belt from the upper attachment.
●
Tighten the strap so that the top of the child
seat rests on the seat backrest.
›››
in Safety instructions on
page 78
Starting the vehicle
Ignition l
ock
Fig. 41
Vehicle key positions
Turn on the ignition: place the key in the igni-
tion and st
art the engine
.
L
ocking and unlocking the steering wheel
●
Lock the steering wheel: remove the key
from the ignition and turn the wheel until it
locks. In vehicles with automatic transmission,
in order to remove the key, move the gear
shift to the P position. If necessary, press the
gear shift blocking key and release it.
●
Unlock the steering wheel: put the key into
the ignition and turn it at the same time as the
steering wheel in the direction indicated by
the arrow. If it is not possible to turn the steer-
ing wheel, it may be because it is locked.
Turning on/switching off the ignition, glow
plugs reheating
●
Turn on the ignition: turn the key to the
2
position.
●
Turn off the ignition: turn the key to the
1
position.
●
Diesel vehicles : the gl
o
w plugs pr
eheat
when the ignition is switched on.
Starting the engine
●
Manual transmission: press the clutch ped-
al all the way down and move the gearbox
lever into neutral.
●
Automatic transmission: press the brake
pedal and move the selector lever to the P
position or into N.
●
Turn the key to the
3
position. The key au-
t
omatically r
et
urns to the
2
position. Do not
pr
ess the accel
er
ator.
Start-Stop system*
When you stop and release the clutch pedal,
the Start-Stop system* turns off the engine.
The ignition remains switched on.
›››
in Ignition lock on page 235
›››
page 234
25
Loading ...
Loading ...
Loading ...