Loading ...
Loading ...
Loading ...
Operation
Boot lid with movement sensor
(Easy Open)
Fig. 142
Rear lid with sensor-controlled open-
ing (Easy Open).
If a valid vehicle key is found close to the boot
lid, it can be unl
ock
ed and l
ocked moving a
foot.
●
Stand behind the bumper, in the middle.
●
With a brisk movement, bring your foot and
lower leg as close as possible to the bumper.
The lower part of the leg needs to be close to
the upper sensor area and your foot to the
lower area
›››
Fig. 142.
●
Quickly remove your foot and lower leg
from the sensor areas. The lid opens.
When closed, the rear lid automatically locks
if the vehicle has been locked beforehand
and there is no valid key inside.
Switching the Easy Open function on or off
The Easy Open function and be activated
and deactivated from menu Vehicle set-
tings on the infotainment system
›››
page 28.
Controls for the windows
Controls for the windows: functions
Read the additional information carefully
›
›
›
page 13
After turning off the ignition, the windows can
be opened and closed for a short time using
the buttons on the door as long as the driver
door or passenger side door is not open.
When the key is removed from the ignition
and the driver door is open, all of the electric
windows can be opened or closed at the
same time keeping the button on the driver’s
door pressed down. After a few seconds, the
convenience opening or closing function will
begin
›››
page 130.
One-touch opening and closing
The one-touch automatic opening and clos-
ing is used to open or close the windows
completely. It will not be necessary to hold
the button of the corresponding electric win-
dow.
For the automatic raising function: pull the
button for the corresponding window up-
wards until it reaches the second position.
For the automatic lowering function: pull
the button for the corresponding window up-
wards until it reaches the second position.
Stop automatic movement: push or pull on
the button of the corresponding window.
Resetting one-touch opening and closing
The one-touch opening and closing function
is not active after the vehicle battery has
been disconnected or is flat and will have to
be reset.
●
Close all windows and doors.
●
Pull the button of the corresponding win-
dow and hold it for one second in this posi-
tion.
●
Release the button and pull upwards and
hold again. The one-touch function is now
ready for operation.
The automatic one-touch electric windows
can be reinitialised individually or several at a
time.
Convenience opening/closing
The electric windows can be opened or
closed from outside using the vehicle key:
130
Loading ...
Loading ...
Loading ...