Loading ...
Loading ...
Loading ...
Emergencies
Rear light, left Rear light, right
13.
Carefully insert the tail light unit into the open-
ing in the bodywork. T
o do this, insert the up-
per rear light unit guide into the attachment
ring.
14.
Tighten the white attachment screw using the
screw
driver from the vehicle tool kit.
15.
Ensure that the tail light unit has been correct-
ly fitted and is firmly secured.
16.
R
eplace the cap
›››
Fig. 115
1
and ro-
tate it 90° in the op-
posit
e direction of the
arrow.
Move the 12 V power
socket support up-
war
ds gently until it is
correctly closed.
17.
Close the storage
compartment.
18. Close the rear lid
›››
page 126.
Changing the number plate light
Fig. 117
In the rear bumper: number plate light.
Fig. 118
Number plate light: Remove the bulb
hol
der
.
Complete operations only in the sequence
giv
en:
Fixed number
plate light
Bolt
ed number
plate light
1.
Press the flat part of
the screw
driver inclu-
ded in the vehicle on-
board tools
(
›››
Fig. 102) in the di-
rection of the arrow, in
the groove of the
number plate light
›››
Fig. 117.
Unscrew the number
plate light scr
ews us-
ing the screwdriver
from the vehicle tool
kit (
›››
Fig. 102).
2. Detach the number plate light.
3.
Turn the connector
lock
››
›
Fig. 118 in the
direction of arrow
1
and pull on the con-
nector.
Separ
ate the attach-
ment tabs from the
r
ear panel of the num-
ber plate light by
pressing.
4.
Rotate the bulb holder
in the direction of the
arrow
›››
Fig. 118
2
and extract it together
with the bulb.
Tak
e the bulb holder
out of the number
plate light.
5.
Replace the faulty bulb with a new identical
bulb.
6.
Insert the bulb holder
int
o the number plate
light and rotate all the
way in the opposite
direction to the arrow
›››
Fig. 118
2
.
Insert the bulb holder
into the number plat
e
light.
100
Loading ...
Loading ...
Loading ...